PICTOGRAMS:
 SINGLE ROPES
For ascent where only one rope is used. This is the most basic and widely used method of using rope for ascents.
 HALF ROPES
Separate ropes are anchored in alternating belaying points. This system reduces the risk of rope breakage by falling rocks and provides maximum protection in alpine conditions or on tough climbs.
 TWIN ROPES
Special finish of sheath yarns, which prevents the origination of dangerous static electricity on the surface of the rope in an explosive atmosphere and therefore prevents against being the source of possible explosions and fires. Recommended for cleaning of tanks in the petrochemical industry.
 STANDARD
Improved basic finishing of dynamic ropes. The new technological process enables to apply impregnation agents as early as the standard finishing of ropes is done. The result is an excellent water resistance and abrasion resistance as well as extended lifespan of TENDON ropes.
 PROTECT SHIELD
In addition to the standard finishing against water and abrasion, the sheath of the entire product is treated with the TENDON NANOTECHNOLOGY surface finish. Using the new progressive method of surface finishing called NANOTECHNOLOGY, TEFLON® in form of very small particles is applied to the rope sheath and very effectively prevents penetration of water, dust and other particles into the rope sheath in which way the water resistance and the abrasion resistance of the ropes are increased.
 COMPLETE SHIELD
The maximum level of protection of ropes with high water resistance and abrasion resistance. Using the new progressive method called NANOTECHNOLOGY, TEFLON® in form of very small particles is applied to the rope sheath as well as the rope core and forms an almost impermeable protective layer against water and dust that could damage the sheath or the core. COMPLETE SHIELD is a new impregnation which extends the general lifespan of TENDON ropes significantly.
 TENDURA +
A fi nish which provides the Touch type ropes with excellent abrasion resistance and maintains all main advantages of the ropes - superb handling, good knotability, high quality of knots, excellent braking effect in mountaineering hardware, or good removal of heat from the rope surface.
 ANTISTAT
The same ropes are always used in pairs, secured at common belaying points. Twin ropes guarantee a high level of safety, especially for classic alpine climbing.
 FIRESHIELD
Special surface finish of sheath yarns, which decreases the combustibility of the treated rope. The finish extends the period of overheating in contact with naked flame or radiating heat. The rope is not incombustible!
 TENDON ELECTRONIC ROPE MARKING (TeROM)
Rope marking system by means of a microchip.
 SBS – SIMPLE BRAIDING SYSTEM
SBS gives the rope better properties. Every streak of the sheath is guided individually, not in a pair as usual. The sheath is more resistant against breakage, but on the other hand it is smoother.
 COMPACT – COMPACT ENDING
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
 MIDPOINT OF ROPE - CENTRE MARKING
At half of the length, the rope is visibly marked by colour, which does not interrupt the core structure and its mechanical properties. Lengths 30 - 80 m only.
 BICOLOUR
The rope is divided into two identical halves with a different sheath colour. It is advantageous for descending.
 CE - SYMBOL OF COMPLIANCE
The CE symbol on a product declares that the product is in compliance with all applicable regulations and has undergone all appropriate compliance evaluation procedures. The number after the CE symbol (e.g. 0408) indicates relevant accredited laboratory.
 UIAA
Products marked with this symbol meet UIAA requirements. The UIAA is the International Mountaineering and Climbing Federation.
EN 1891
This European norm establishes safety requirements and testing procedures for static ropes at European Union accredited laboratories. Products labeled with the symbol of this European norm satisfy the given safety requirements.
EN 892
This European norm establishes safety requirements and testing procedures for dynamic climbing ropes at European Union accredited laboratories. Products labeled with the symbol of this European norm satisfy the given safety requirements.
NFPA
These ropes meet the life safety rope requirements of NFPA 1983, standard on fire service life safety rope and equipment for emergency services, 2006 edition. |
